Yudian Advanced Universal PID Controller-AI808

• TECHNICAL SPECIFICATION
• Input type: (Either of below specifications can be used selectively in the same instrument)
• Thermocouple: K, S, R, E, J, N
• Resistance temperature detector: Cu50, Pt100
• Linear voltage: 0～5V, 1～5V, 0～1V, 0～100mV, 0～20mV, etc.
• Linear current (external precise shunt resist needed): 0～10mA, 1～20mA, 4～20mA, etc.
• Extended input (install I4 module in MIO) : 0～20mA, 4～20mA or two line transmitter.
• Optional: apart from the above-mentioned Input type, an additional type can be provided upon request. (Graduation
• index is needed)
• Instrument Input range
• K(0～1300℃), S(0～1700℃), R(0～1700℃), E(0～1000℃), J(0～1200℃), N(0～1300℃)
• K(32～2372℉), S(32～3092℉), R(32～3092℉), E(32～1832℉), J(32～2192℉), N(32～2372℉)
• Cu50(-50～+150℃), Pt100(-200～+800℃)
• Cu50(-58～+302℉), Pt100(-328～+1472℉)
• Linear Input: -9990～30000 defined by user.
• Measurement accuracy : 0.3%FS ± 0.1℃
• Resolution : 0.1℃ for K, E, T, N, J, Cu50, Pt100; 1℃ for S, R
• Temperature shift : ≤0.015%FS /℃ (typical value is 80ppm/℃)
• Sampling period : read A/D converter 8 times per second
• Response time : ≤0.5s ( when digital filter parameter FILt=0)
• Alarm function : high limit, low limit, deviation high limit and deviation low limit; with alarm blocking at the beginning
• of power on.
• Control period : 0.5～120.0 seconds selectable, and it should be integer times of 0.5 second.
• Control mode:
• On-off control mode (deadband adjustable)
• Standard PID with auto tuning
• AI PID with auto tuning, adopting AI artificial intelligence algorithm.
• Output mode (modularized)
• Relay output (NO+NC): 250VAC/2A or 30VDC/1A
• Servo motor output
• TRIAC no contact discrete output (NO or NC): 100～240VAC/0.2A (continuous), 2A (20mS instantaneous, repeat
• period≥5s)
• SSR Voltage output: 12VDC/30mA (used to drive SSR).
• Thyristor zero crossing trigger output: can trigger TRIAC of 5～500A, a pair of inverse paralleled SCRs or SCR
• power module.
• Linear current output: 0～20mA, 4～20mA (Output voltage ≥11V, maximum load resistor 500ohm, output
• precision 0.2%FS)
• Electromagnetic compatibility (EMC) : ±4KV/5KHz according to IEC61000-4-4; 4KV according to IEC61000-4-5.
• Isolation withstanding voltage : between power, relay contact or signal terminal ≥2300VDC; between isolated
• electroweak terminals ≥600VDC
• Power supply : 100～240VAC, -15%, +10% / 50-60Hz; 120～240VDC; or 24VDC/AC, -15%, +10%.
• Power consumption: ≤6W
• Operating Ambient : temperature -10～60℃; humidity ≤90%RH
• Front panel dimension: 96×96mm, 160×80mm, 80×160mm, 48×96mm, 96×48mm, 48×48mm, 72×72mm
• Panel cutout dimension: 92×92mm, 152×76mm, 76×152mm, 45×92mm, 92×45mm, 45×45mm, 68×68mm
• Depth behind mounting surface: 100mm